Building & Contracting
Cement, Mortar & Efflorescence Remover
A highly effective formulation which quickly removes unwanted cement, mortar and surface efflorescence.
Uses: |
|
Application: | Spray onto wet surface and allow to stand. Rinse off with plenty of clean water. Scrub for heavy deposits. |
Brick Cleaner
An acid based cleaner for removing building residues (such as cement and mortar) from both old and new bricks.
Uses: |
|
Application: | Dilute and apply directly to the brick surface. Allow to stand for a few minutes and rinse with water. |
Concrete and Brick Sealant
An advanced synthetic sealant formulation which forms a protective layer at the surface of porous materials such as bricks and concrete. Ideal for use after cleaning processes to ensure that stonework is protected from daily weathering.
Uses: |
|
Application: | Apply directly to the brick or concrete surface. Allow to dry and rinse if desired. |
Mould Release Agent
A hybrid mould release agent providing both mechanical and chemical release chararcteristics. The advanced formulation prevents initial adherence of the concrete product and produces a lubricating layer which allows quick and easy release of the concrete form from the mould.
Uses: |
|
Application: | Spray directly onto the concrete mould ensuring complete coverage. |
Mortar Plasticiser
A high strength plasticiser for brick laying and plastering mortars. Improves the workability of mortar for brickwork, masonry and sand/cement rendering applications. Increases resistance to frost and reduces shrinkage and crazing.
Uses: |
|
Application: | Admixture |
Mortar Plasticiser Concentrate
A high strength, low dosage plasticiser for brick laying and plastering mortars. Improves the workability of mortar for brickwork, masonry and sand/cement rendering applications. Increases resistance to frost and reduces shrinkage and crazing. Super concentrated formulation for economy.
Uses: |
|
Application: | Admixture |
Concrete Hardener and Dustproofer
For application to old and new concrete surfaces. Reacts with the concrete, sealing pores and proving a high strength, dust free finish. Forms a layer which is integral to the concrete so is not degraded such as is seen with resin based products. Increased durability of the surface.
Uses: |
|
Application: | Admixture |
Heat Transfer Fluid
Our Heat Transfer Fluid is a high performance, non-hazardous liquid for use in heating and cooling systems. It includes corrosion inhibitors to maximise the lifetime of your system. Super low freezing point and elevated boiling point make it idea for use in all closed loop heating and cooling systems. Suitable for use in solar panel based heating applications.
Uses: |
|
Paint Removal
Hi-Strip
Hi-Strip is a professional paint stripper designed for heavy duty usage for use will all forms of painted coating.
Uses: |
|
Application: | Immersion. |
Hi-Strip Gel
Hi-Strip Gel is a professional paint stripper gel designed for heavy duty usage with all forms of painted coating, graffiti etc.
Uses: |
|
Application: | Apply by brush or cloth. |
PC-stripper
PC-Stripper is a professional paint stripper specifically formulated for the removal of powder coated paint. It is designed to be used in conjunction with PC-Activator.
Uses: |
|
Application: | Immersion |
PC-Activator
PC-Activator is designed for use with PC-Stripper. Addition of PC-Activator allows PC-Stripper to be re-activated thus minimising usage of PC-Stripper.
Uses: |
|
Application: | Add to depleted PC-Stripper |
Degreasing
Citri-Solv
Citrisolv is an industrial duty alkaline degreaser. Water based formulation comprising renewable orange extracts. For the removal of grease, oil and other petroleum type deposits from metal, coachwork, concrete and floors. Removes chewing gum.
Uses: |
|
Application: | Use neat or dilute and apply with spray, mop or cloth. May also be used (dilute) for steam cleaning and in dip tanks. |
DPM316
DPM316 is an alkaline, solvent degreaser specifically formulated to have minimal odour whilst maintaining the best possible degreasing performance. The low aroma formulation is safe for use in all environments and does not require the use of respiratory protection. Suitable for use on most metals, polymers and stone surfaces.
Uses: |
|
Application: | Use neat or dilute and apply with spray, mop or cloth. May also be used (dilute) for steam cleaning and in dip tanks. |
SE10
SE10 is a solvent degreaser which dissolve oils and tars from surfaces. Fast acting. Dissolves all hydrocarbon oils including heavy crude oils. Not suitable for use on asphalt or bituminous surfaces.
Uses: |
|
Application: | Spray or brush on. Allow appropriate contact time and wash off with water. |
CIP Cleaner
A concentrated powder cleaner formulated for the cleaning of pipes, recirculation systems and other CIP cleaning requirements. The chlorinated, caustic formulation quickly and effectively removes all forms of oil and protein accumulation ensuring that blockages do not occur.
Uses: |
|
Application: | Internal circulation. |
General Cleaning
Chewing Gum Remover
Chewing Gum Remover is based on solvents derived from oranges and is highly effective in softening and removing chewing gum from surfaces.
Uses: |
|
Application: | Apply directly to effected area, allow a suitable contact time and scrape/wipe away the remenants. |
Foam Cleaner
A high foaming, bactericidal cleaner. Foam cleaner is applied through specialised foam production apparatus and produces a highly stable foam which clings to surfaces where it effectively kills bacteria and cleans the underlying surface. After a ‘soak’ time, it can be safely removed by power hose.
Uses: |
|
Application: | Apply using specialised foam generating equipment. |
Algae & Moss Remover
An extra concentrated formulation which kills and removes moss and algae. Ideal for use on concrete and stone surfaces such as patios.
Uses: |
|
Application: | Dilute and spray on or apply by brush. Allow to stand and remove with high pressure water. |
Fungi-wash
A mild bactericidal detergent for general purpose bactericidal cleaning.
Uses: |
|
Application: | Apply by spray, mop or cloth. For optimal results, rinse with high pressure water. |
Pressure Wash
A highly concentrated pressure washing detergent which rapidly removes dirt, grease and oily deposits. Produces a soft foam which flows into hard to reach areas. Not suitable for use on aluminium.
Uses: |
|
Application: | Automatically dosed via pressure washing apparatus |
Notes: | Not suitable for use with aluminium. |
Pressure Wash – Non-Caustic (Aluminium Safe)
A highly concentrated, non-caustic, pressure washing detergent which rapidly removes dirt, grease and oily deposits. Produces a soft foam which flows into hard to reach areas.
Uses: |
|
Application: | Automatically dosed via pressure washing apparatus |
Notes: | Suitable for use with aluminium. |
UPVC Renovator
UPVC Renovator is a solvent based cleaner and renovator for all UPVC/PVC-u surfaces. It effectively removes heavy dirt and staining, including UV staining to leave a new looking surface.
Uses: |
|
Application: | Apply by cloth or spray. Wash the area thoroughly after use. |
Cleaning in Place
CIP Cleaner
A concentrated powder cleaner formulated for the cleaning of pipes, recirculation systems and other CIP cleaning requirements. The chlorinated, caustic formulation quickly and effectively removes all forms of oil and protein accumulation ensuring that blockages do not occur.
Uses: |
|
Application: | Internal circulation. |